ViewSonic PJD7822HDL User Guide - Page 44
Using the 3D functions, Using the projector in standby mode - 3d glasses
View all ViewSonic PJD7822HDL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Using the 3D functions This projector features 3D function which enables you to enjoy 3D movies, videos, and sporting events in a more realistic way by presenting the depth of the images. You need to wear a pair of 3D glasses to view 3D images. If the 3D signal is input from an HDMI 1.4a compatible device, the projector detects the signal for 3D Sync information and once detected, it projects images in 3D format automatically. In other cases, you may need to manually select a 3D Sync format for the projector to project 3D images correctly. To select a 3D Sync format: 1. Press MENU/EXIT on the projector or Menu on the remote control and then press / until the DISPLAY menu is highlighted. 2. Press to highlight 3D Settings and press MODE/ENTER on the projector or Enter on the remote control. 3. Press to highlight 3D Sync and press MODE/ENTER on the projector or Enter on the remote control. 4. Press to select a 3D Sync setting according to the table below and then press MODE/ENTER on the projector or Enter on the remote control to confirm. When the 3D Sync function is on: • The brightness level of the projected image will decrease. • The Color Mode cannot be adjusted. • The Zoom can only magnify the pictures to limited sizes. If you discover the inversion of the 3D image depth, set the 3D Sync Invert function to "Invert" to correct the problem. Using the projector in standby mode Some of the projector functions are available in standby mode (plugged in but not turned on). To use these functions, be sure you have turned on the corresponding menus under SYSTEM SETTING: BASIC > Standby Settings, and the cable connections are correctly made. For the connection methods, see the Connection chapter. Power Saving Less than 0.5W power consumption when Power Saving mode is turned on. When Off is selected, the projector is able to provide 5V/1A power in standby mode. Active VGA Out Selecting On outputs a VGA signal when the COMPUTER IN and COMPUTER OUT sockets are correctly connected to devices. The projector outputs the signal received only from COMPUTER IN. Active Audio Out Selecting On outputs an audio signal when the AUDIO IN and AUDIO OUT sockets are correctly connected to devices. Quick Power Off Selecting On enables the function and the projector will not enter the cooling process after being shut down. Selecting Off disables the function and the projector will enter normal cooling process after being shut down. 37