ViewSonic PJD7822HDL User Guide - Page 60
Resetting the lamp timer, SYSTEM SETTING, ADVANCED, Lamp Settings, MODE/ENTER, ENTER, Reset lamp timer
View all ViewSonic PJD7822HDL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
9. Place the lamp protection film supplied with the new lamp on the lamp compartment. 10. Replace the lamp cover on the projector. 11. Tighten the screws that secure the lamp cover. CAUTION • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screws. 12. Restart the projector. CAUTION Do not turn the power on with the lamp cover removed. Resetting the lamp timer 13. After the startup logo, open the On-Screen Display (OSD) menu. 14. Go to the SYSTEM SETTING: ADVANCED > Lamp Settings menu. Press MODE/ENTER on the projector or ENTER on the remote control. The Lamp Settings page is displayed. 15. Press to highlight Reset lamp timer and press MODE/ENTER on the projector or ENTER on the remote control. A warning message is displayed asking if you want to reset the lamp timer. 16. Highlight Reset and press MODE/ENTER on the projector or ENTER on the remote control. The lamp time will be reset to '0'. CAUTION Do not reset if the lamp is not new or replaced as this could cause damage. Notice Reset Lamp Timer Reset Cancel 53