ViewSonic PS700W - 3300 Lumens WXGA Ultra Short Throw Projector with HV Keystone - Page 35
Adjusting Color, Adjusting Tint, Adjusting Sharpness, Adjusting Brilliant Color, Reducing image noise
View all ViewSonic PS700W - 3300 Lumens WXGA Ultra Short Throw Projector with HV Keystone manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Adjusting Color Go to the IMAGE > Advanced > Color menu and press / . Lower setting produces less saturated colors. If the setting is too high, colors on the image will be overpowering, which makes the image unrealistic. This function is only available when the input signal is S-Video, Video, YPbPr or YCbCr. Adjusting Tint Go to the IMAGE > Advanced > Tint menu and press / . The higher the value, the more greenish the picture becomes. The lower the value, the more reddish the picture becomes. This function is only available when the input signal is S-Video, Video, YPbPr or YCbCr. Adjusting Sharpness Go to the IMAGE > Advanced > Sharpness menu and press / . The higher the value, the sharper the picture becomes. The lower the value, the softer the picture becomes. This function is only available when the input signal is S-Video, Video, YPbPr or YCbCr. Adjusting Brilliant Color Go to the IMAGE > Advanced > Brilliant Color menu and press / . This feature utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing truer, more vibrant colors in the projected picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select a level that suits your need. If you don't need it, select Off. Reducing image noise Go to the IMAGE > Advanced > Noise Reduction menu and press / . This function reduces electrical image noise caused by different media players. The higher the setting, the less the noise. This function is only available when a PC, Video or S-Video input signal is selected. Selecting a gamma setting Go to the IMAGE > Advanced > Gamma menu and select a preferred setting by pressing /. Gamma refers to the relationship between input source and picture brightness. Selecting a Color Temperature Go to the IMAGE > Color Temp. menu and press Enter. The options available for color temperature settings vary according to the signal type selected. 1. Cool: With the highest color temperature, Cool makes the image appear the most bluish white than other settings. 2. Neutral: Makes images appear bluish white. 3. Normal: Maintains normal colorings for white. 4. Warm: Makes images appear reddish white. 30