ViewSonic PS700W - 3300 Lumens WXGA Ultra Short Throw Projector with HV Keystone - Page 55
Function, Description, Auto Power On, Smart Energy, MHL Settings, Smart Restart, Quick Power
View all ViewSonic PS700W - 3300 Lumens WXGA Ultra Short Throw Projector with HV Keystone manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
3. POWER MANAGEMENT menu Function Description Computer Selecting Enable allows the projector to turn on automatically once the VGA signal is fed through the VGA cable. Auto Power On CEC See "Using the CEC function" on page 34 for details. Direct Power On Selecting On allows the projector to turn on automatically once the power is fed through the power cord. Auto Power Off See "Setting Auto Power Off" on page 56 for details. Smart Energy Sleep Timer See "Setting Sleep Timer" on page 57 for details. MHL Settings Power Saving See "Setting Power Saving" on page 57 for details. Power Out Switch power supply port between MHL or USB; projector can only output power on one port at the same time. If the HDMI/MHL port can't be detected, please do MHL Reset or switch power out. Smart Restart MHL Reset Selecting Reset to reapply power after a power outage. Selecting Enable enables you to restart the projector immediately within 120 seconds after turning it off. After 120 seconds, if the projector is not turned on again, it will directly enter the standby mode. It takes some time to initiate this function. Make sure the projector has been turned on for more than 4 minutes. If the projector is resumed by using the Smart Restart feature, this function can be executed immediately. Quick Power Off When Enable is selected, the Quick Power Off function will be automatically set to "Enable". Selecting Enable enables the function and the projector will not enter the cooling process after being shut down. Selecting Disable disables the function and the projector will enter normal cooling process after being shut down. If you attempt to restart the projector right after it's been turned off, it may not be turned on successfully and will rerun its cooling procedure. When Disable is selected, the Smart Restart function will be automatically turned off. 50