ViewSonic PS700W - 3300 Lumens WXGA Ultra Short Throw Projector with HV Keystone - Page 56

Page 56 highlights

4. BASIC menu Function Description Audio Settings See "Adjusting the sound" on page 42 for details. Presentation Timer See "Setting the presentation timer" on page 32 for details. Pattern Blank Timer The projector can display several test patterns. It helps you adjust the image size and focus and check that the projected image is free from distortion. See "Hiding the image" on page 33 for details. Message Splash Screen Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. Allows you to select which logo screen will be displayed during projector start-up. My Button Sets a hotkey on remote control. 3D Settings HDMI Settings LAN Settings Lamp Settings Filter Settings DCR See "Depending on the connected device, the CEC function may not work." on page 34 for details. See "Changing HDMI input settings" on page 24 for details. See "Controlling the projector through a LAN environment" on page 35 for details. Lamp Mode See "Setting Lamp Mode" on page 56 for details. Reset Lamp Hours Resets the lamp timer after new lamp is installed. For changing the lamp, please contact qualified service personnel. Lamp Hours See "Getting to know the lamp hour" on page 56 for details on how the total lamp hour is calculated. See "Using the dust filter (optional accessory)" on page 54 for details. Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic modes according to the input image detected. This function is only available for PC timings from a VGA or HDMI input signal. After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation. 5. ADVANCED menu 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
51
Function
Description
Audio Settings
See
"Adjusting the sound" on page 42
for details.
Presentation
Timer
See
"Setting the presentation timer" on page 32
for details.
Pattern
The projector can display several test patterns. It helps you
adjust the image size and focus and check that the projected
image is free from distortion.
Blank Timer
See
"Hiding the image" on page 33
for details.
Message
Selecting
On
displays the current information on the screen
when the projector is detecting or searching for a signal.
Splash Screen
Allows you to select which logo screen will be displayed
during projector start-up.
My Button
Sets a hotkey on remote control.
3D Settings
See
"Depending on the connected device, the CEC function
may not work." on page 34
for details.
HDMI Settings
See
"Changing HDMI input settings" on page 24
for details.
LAN Settings
See
"Controlling the projector through a LAN environment"
on page 35
for details.
Lamp Settings
Lamp Mode
See
"Setting Lamp Mode" on page 56
for details.
Reset Lamp Hours
Resets the lamp timer after new lamp is installed. For
changing the lamp, please contact qualified service personnel.
Lamp Hours
See
"Getting to know the lamp hour" on page 56
for details on
how the total lamp hour is calculated.
Filter Settings
See
"Using the dust filter (optional accessory)" on page 54
for
details.
DCR
Enables or disables the DCR (Dynamic Contrast Ratio)
function. Selecting
On
enables the function and the projector
will automatically switch the lamp mode between normal and
economic modes according to the input image detected.
This function is only available for PC timings from a
VGA or HDMI input signal.
After enabling DCR, frequent lamp mode switching may
shorten lamp life and noise level will vary during
operation.
4. BASIC menu
5. ADVANCED menu