Viking VISC5304BSS Use and Care Manual - Page 25

Product Care Door Removal WARNING TO PREVENT PERSONAL INJURY Before removing the doors, make sure the pins are properly installed in the hinges. Failure to do so can result in personal injury to hands and/or fingers. 2 FRONT REAHR OT FRONT REAHR OT 1 FRONT REAHR OT FRONT REAHR OT Open door completely. Place pin in pin hole. 3 FRONT REAHR OT FRONT REAHR OT Remove hinge trim screws and hinge trim. 4 FRONT REAHR OT FRONT REAHR OT Close until pins stop door. Lift door up and out. 48 Door Replacement and Adjustment 1 FRONT REAHR OT FRONT REAHR OT Reinstall door to range. 2 FRONT REAHR OT FRONT REAHR OT 2 1 2 3 Open door completely. Reinstall hinge trim. 3 FRONT REAHR OT FRONT REAHR OT 4 FRONT REAHR OT FRONT REAHR OT Remove pins from hole in hinges. 5 FRONT REAHR OT FRONT REAHR OT Close door. If the door needs to be adjusted, loosen hinge trim screws (see step 2). Adjust the screws located between the door and kickplate using a 5/32" hex head allen wrench. After adjustment, tighten hinge trim screws. 49 Product Care