Viper 5704 Owner Manual - Page 17
Basic Commands Direct Access - valet mode
View all Viper 5704 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Basic Commands (Direct Access) Arm Press and release 6:30 The alarm arms, doors lock (if connected), and the siren chirps and parking lights flash once. The ARMED text and beeps play to confirm and the System Status Icons update. If Valet mode* is On, the doors lock and the VALET text and tone play. Exit Valet mode to arm the alarm normally. If a trigger zone fault is detected the siren chirps once again and the Trigger Zone Fault report** plays. To Arm and Panic Press and hold The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds the siren and flashes the parking lights. The PANIC text and siren tones play to confirm. Press the or button to stop the output. Disarm Press and release The alarm disarms, doors unlock (if connected), and the siren chirps and parking lights flash twice. The DISARM text and beeps play to confirm and the system status icons update. If Valet mode* is On, the doors unlock and the VALET text and tone play. More than 2 siren chirps and remote beeps indicate a trigger has occurred. The DISARM text is replaced by the Alarm report.** 14 © 2011 Directed Electronics. All rights reserved.