Viper 5704 Owner Manual - Page 48
Programming - sensor adjust
View all Viper 5704 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Programming To enter; hold the button for 8 seconds, the remote emits one long beep and turns the LED on, the programming main menu has been accessed. To exit; press and release the button to go back and repeat to exit. 1 short and 1 long beep is emitted for each step back, the LED turns off when programming is exited. Sensor Adjust The button is used for sensor adjustment, to avoid unintended alarm triggers, it is recommenced that an authorized Directed dealer perform all sensor adjustments. Remote Features menu Press and release the button, 2 LED flashes and beeps indicate the remote features menu is accessed and can be set. Press buttons indicated below, 1beep and flash turns the feature on, 2 beeps and flashes turns the feature off. s Autolock feature: Press to turn on/off. s Remote Beeps: Press to turn on/off. s Car 2 feature: Press to turn on/off. Remote Learning Press the button,3 LED flashes and beeps indicates the remote is ready to program to the system. Per the instruction in "Pair Remote:" on page 28 under the Main Menu section of this guide, following step 4 of Prepare the vehicle system to be Paired with a new remote. Press and hold the button, the siren emits one long chirp to confirm the remote has been learned. 1-Way © 2011 Directed Electronics. All rights reserved. 45