Viper 5704 Owner Manual - Page 39

Timer Start operation Activation begins a countdown timer as set by the installer (default 3 hours). When the timer expires the engine starts and the REMOTE START ON message is sent to the remote control. When the Remote start runtime expires the engine shuts off, the REMOTE START OFF message is sent to the remote control and the countdown timer restarts. This will repeat as many times as set by the installer (default 6 starts). Timer Start is exited after the final start. Smart Start operation Smart Start uses the settings for Timer Start in addition to temperature and battery level to automatically start the engine. Activation begins the countdown timer. When the timer expires the vehicle interior temperature and battery level is checked and, if the Temperature is above 100F, below 0F, or the battery level is below 10.5v, the engine will start and the REMOTE START ON message will be sent to the remote controls. When the Remote start runtime expires the engine shuts off, the REMOTE START OFF message is sent to the remote control and the countdown timer restarts. Smart Start is exited after the final start. Note The temperature and battery thresholds can be changed by an authorized Directed dealer if a higher or lower threshold is desired. Temperature Reporting During Remote start the vehicle interior is checked regularly for temperature changes. If a change in temperature is detected this report will be sent to the remote for display. Each time the remote receives this report it will beep, update, and display the newest temperature information using the Temperature Gauge icon. 36 © 2011 Directed Electronics. All rights reserved.