Vizio VO22LFHDTV10A VO22LF HDTV User Manual - Page 49

VIZIO VO22L FHDTV10A User Manual 3.4 DTV / TV Tuner Setup When you first used your VO40L FHDTV10A you will have setup your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 3.4.1 Tuner Mode When the button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the TV page. Press the selection. button to highlight the Tuner Mode Press the button to choose Cable or Air (Antenna) depending upon which equipment you have attached to the DTV / TV Input. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 3.4.2 Auto Search Press the button to highlight the Auto Search selection. Press the button to Auto Search for TV channels available. The TV will automatically search for analog and digital channels. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 3.4.3 Skip Channel After the TV has stored all of the available DTV channels in memory you will find that some channels will be too weak to watch comfortably or they may be channels you do not want to see. Select the channel you wish to remove, press the . Press the buttons to open the TV TUNER SETUP menu. Press the button to highlight SKIP CHANNEL. Press the button to select this channel to be skipped when using the CH+ or CH- button. You will still be able to select this channel using the number buttons on the remote control. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Version 9/9/2008 49 www.VIZIO.com