Vtech Two Handset Cordless Answering System including a Cordless DECT 6.0 Headse - Page 52

Answering system settings Call screening You can hear incoming messages at the telephone base while they are being recorded. Follow the below steps to turn this feature on or off. 1. Press MENU/SELECT when the handset is not in use. 2. Press / VOL or VOL/CID to highlight >Answering sys, then press MENU/SELECT. 3. Press / VOL or VOL/CID to highlight >Ans sys setup, then press MENU/SELECT. 4. Press MENU/SELECT to highlight >Call screening. 5. Press / VOL or VOL/CID to choose >On or >Off, then press MENU/SELECT. • If call screening is set to On while the answering system is answering a call, press VOL/ on the telephone base to temporarily decrease the volume. The lowest setting will mute call screening for that call. • If call screening is set to Off while the answering system is answering a call, press /VOL once on the telephone base to temporarily turn the call screening on. Continue to press /VOL to increase the volume to the desired level for that call. Number of rings You can choose from 2, 4, or 6 rings; or toll saver. With toll saver selected, the answering system answers after two rings when you have new messages, and after four rings when you have no new messages. This enables you to check for new messages and avoid paying unnecessary long distance charges if you are calling from out of your local area. 1. Press MENU/SELECT when the handset is not in use. 2. Press / VOL or VOL/CID to highlight >Answering sys, then press MENU/SELECT. 3. Press / VOL or VOL/CID to highlight >Ans sys setup, then press MENU/SELECT. 4. Press / VOL or VOL/CID to highlight ># of rings, then press MENU/SELECT. 5. Press / VOL or VOL/CID to choose from 6, 4, 2 or Toll saver, then press MENU/SELECT to confirm your selection. 48