Weber 3100 NG Owner Manual - Page 15

Step 13 Install side burner You will need: side burner assembly, burner grate, and manifold bracket. ƽWARNING: Make sure gas supply is OFF. Slide the side burner assembly into the open end of the right frame. Route the side burner hose around the tank panel so it will not interfere with scale indicator rod. The side burner hose is connected in the following manner: Slide back the collar of the quick disconnect on the manifold. Push the male fitting of the side burner hose into the quick disconnect, and maintain pressure. Slide the collar closed. Figure 14a. Figure 14b shows the quick disconnect engaged.Install burner grate. Check to be sure the side burner valve is OFF. Push side burner control knob down and turn clockwise. Step 14 Install manifold bracket You will need: manifold bracket Hook the bracket onto the manifold at the center burner valve. Figure 15. Place your hand underneath the bracket. Lift the bracket, manifold and cooking box slightly as a unit and hook onto the frame brace. Manifold bracket Frame brace Figure 15 Male fitting of side burner a) Figure 14 Manifold side view Quick disconnect engaged b) Side burner hose Manifold side view 15