Weider 240 Tc Bench Uk Manual - Page 10
Front Leg 2 with the M10 x 54mm Bolt Set - press
View all Weider 240 Tc Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
12. Attach the Weight Tube (24) to the Leg Lever (8) with an M8 x 58mm Bolt (72), two M8 Washers (73), a 13mm x 11.5mm Spacer (53), and an M8 Locknut (67). Next, press the Leg Lever Bumper (42) onto the Weight Tube (24). Apply grease to the barrel of an M10 x 54mm Bolt Set (56). Attach the Leg Lever (8) to the bracket on the Front Leg (2) with the M10 x 54mm Bolt Set (56). Make sure that the barrel of the Bolt Set is inserted through both sides of the bracket on the Front Leg. 12 56 Bracket Grease 8 67 73 42 56 2 24 53 73 72 13. Insert a Long Pad Tube (54) into the indicated hole in the Leg Lever (8). Slide a Large Foam Pad (25) onto each end of the Long Pad Tube (54). Then, press a Large Pad Cap (46) into each Large Foam Pad. Repeat this step with the other two Long Pad Tubes (54). 13 46 25 54 54 8 25 54 46 10