Weider 240 Tc Bench Uk Manual - Page 5
Part Identification Chart
View all Weider 240 Tc Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot find a part in the hardware kit, check to see if it has been preassembled. M6 Washer (65) M4 x 16mm Self-tapping Screw (75) M8 x 58mm Bolt (72) M8 Washer (73) M10 Black/Silver Washer (64, 70) M6 x 16mm Screw (61) M10 x 20mm Bolt (63) M6 x 40mm Screw (62) M10 x 52mm Carriage Bolt (74) M10 x 57mm Carriage Bolt (68) M10 x 60mm Bolt (57) M8 Locknut (67) M10 x 55mm Bolt (59) M10 x 65mm Bolt (55) M10 Silver/Black Locknut (34, 66) M10 x 70mm Bolt (71) M10 x 54mm Bolt Set (56) M10 x 130mm Bolt (58) M10 x 170mm Bolt (60) 5