Weider 240 Tc Bench Uk Manual - Page 12
Slide the Weight Carriage 15 onto the Lat - storage bench
View all Weider 240 Tc Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
17. Route the Cable (21) through the top of the Lat 17 Tower (14); make sure that the Cable is under the storage hook. Next, wrap the Cable (21) over the Pulley (22), and attach the Pulley inside the Lat Tower (14) with an M10 x 60mm Bolt (57), two M10 Black Washers (64), two 16mm x 10mm Spacers (52), and an M10 Black Locknut (66). Insert an M10 x 20mm Bolt (63) into the bracket on the Weight Carriage (15). Slide the Weight Carriage (15) onto the Lat Tower (14). Then, slide the end of the Cable (21) onto the M10 x 20mm Bolt (63) and tighten an M10 Black Locknut (66) onto the Bolt. 66 64 52 22 Storage Hook 52 64 57 21 14 63 66 15 18. Make sure that all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTMENT, starting on page 13. 12