Weider 240 Tc Bench Uk Manual - Page 9

Attach the Backrest 18 to the Backrest Tubes

Get Weider 240 Tc Bench PDF manuals and user guides View all Weider 240 Tc Bench manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

9. Orient the Backrest (18) and the Backrest Tubes (16) as shown. Make sure that the indi- 9 cated holes are in the location shown. Attach the Backrest (18) to the Backrest Tubes (16) with four M6 x 40mm Screws (62) and four M6 Washers (65). Do not tighten the Screws yet. 10. Apply grease to an M10 x 170mm Bolt (60). 10 Attach the Backrest Tubes (16) to the welded tube on the Frame (1) with the M10 x 170mm Bolt (60), two M10 Black Washers (64), and an M10 Black Locknut (66). See step 9. Tighten the M6 x 40mm Screws (62). 18 16 65 Holes 62 65 62 66 64 16 60 1 64 Grease 11. Attach the Seat (19) to the Frame (1) with four 11 M6 x 40mm Screws (62) and four M6 Washers (65). 19 1 65 65 62 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
9
9.
Orient the Backrest (18) and the Backrest
Tubes (16) as shown.
Make sure that the indi-
cated holes are in the location shown.
Attach the Backrest (18) to the Backrest Tubes
(16) with four M6 x 40mm Screws (62) and four
M6 Washers (65).
Do not tighten the Screws
yet.
9
18
Holes
16
62
62
65
10. Apply grease to an M10 x 170mm Bolt (60).
Attach the Backrest Tubes (16) to the welded
tube on the Frame (1) with the M10 x 170mm
Bolt (60), two M10 Black Washers (64), and an
M10 Black Locknut (66).
See step 9.
Tighten the M6 x 40mm Screws
(62).
60
Grease
64
64
66
16
1
10
11. Attach the Seat (19) to the Frame (1) with four
M6 x 40mm Screws (62) and four M6
Washers (65).
11
1
65
65
62
19
65