Weider 8920 English Manual - Page 12
Seat Assembly
View all Weider 8920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
22. Attach the end of the Short Cable (23) to the 22 Long "U"-Bracket (57) with an M8 Nylon Locknut (3) and an M8 Washer (68). Do not completely tighten the Nylon Locknut; it should be threaded onto the end of the Cable until two threads are showing above the Nylon Locknut, as shown in the inset drawing. 3 68 57 23 3 SEAT ASSEMBLY 68 57 23 23 23. Attach the Backrest (41) to the Front Upright (42) with two M6 x 63mm Screws (43) and two M6 Washers (10). 42 41 43 10 12
22. Attach the end of the Short Cable (23) to the
Long āUā-Bracket (57) with an M8 Nylon Locknut
(3) and an M8 Washer (68).
Do not completely
tighten the Nylon Locknut; it should be
threaded onto the end of the Cable until two
threads are showing above the Nylon
Locknut, as shown in the inset drawing.
23. Attach the Backrest (41) to the Front Upright (42)
with two M6 x 63mm Screws (43) and two M6
Washers (10).
SEAT ASSEMBLY
12
23
41
42
10
43
22
57
3
68
23
23
57
3
68