Weider 950 English Manual - Page 10
an M10 Washer 55, and an M10 Nylon
View all Weider 950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
15. Wrap the Arm Cable (36) around a Pulley (39). 15 Attach the Pulley to the Double "U"-Bracket (15) with an M10 x 45mm Bolt (68) and an M10 Nylon Locknut (56). 39 36 15 68 56 16. Wrap the Arm Cable (36) around a "V"-Pulley 16 (38). Attach the Pulley and a Long Cable Trap (40) to a Pulley Bracket (30) with an M10 x 55mm Bolt (69) and an M10 Nylon Locknut (56). Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley. Attach the Pulley Bracket (30) to the bracket on the Front Upright (4) with an M10 x 78mm Bolt (71) and an M10 Nylon Locknut (56). 17. Slide the Arm Cable (36) onto the hook on the 17 Left Arm (11). 71 56 30 56 36 40 4 38 69 36 Hook 11 18. Locate the Short Cable (80). Attach the Cable to 18 the side of the Base (1) with an M10 x 70mm Bolt (82), an M10 Washer (55), and an M10 Nylon Locknut (56). 80 82 56 55 1 10