Weider 950 English Manual - Page 13

SEAT ASSEMBLY 27 27. Press two 38mm Square Inner Caps (48) into the ends of the Seat Frame (6) and the Leg Lever (7). Attach the Eyebolt (53) to the Leg Lever (7) with an M10 Washer (55) and an M10 Nylon Locknut (56). Lubricate the M8 x 66mm Bolt (60). Attach the Leg Lever (7) to the Seat Frame (6) with the Bolt and an M8 Nylon Locknut (61). 28. Insert an M6 x 50mm Carriage Bolt (62) into the 28 center hole in the Seat Plate (24). Attach the Seat Plate to the Seat (17) with two M6 x 16mm Screws (59). Attach the Seat (17) to the Seat Frame (6) with the M6 x 50mm Carriage Bolt (62), an M6 x 50mm Screw (64), two M6 Washer (63), and an M6 Nylon Locknut (58). 29. Rest the bracket on the Seat Frame (6) on the pin 29 on the Front Upright (4). Secure the Seat Frame with an M8 x 67mm Carriage Bolt (66) and the Seat Frame Knob (32). 6 Lubricate 60 56 55 48 61 7 53 48 17 6 62 24 59 64 63 58 6 32 Pin 66 4 30. Attach the Backrest (16) to the Front Upright (4) 30 with two M6 x 63mm Screws (70) and two M6 Washers (63). 63 70 4 16 70 63 13