Weider Club C670 Bench English Manual - Page 14

Attach the Weight Guide Top Frame 49 to

Get Weider Club C670 Bench PDF manuals and user guides View all Weider Club C670 Bench manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

23. Press two 48mm Weight Carriage Caps (63) into 23 the Weight Carriage (62). Insert an M10 x 19mm Bolt (102) into the bracket on the Weight Carriage (62) from the side shown. Slide the Weight Carriage (62) onto the Weight Guide Upright (42) so that the weight tube is toward the Center Upright (45). 63 62 Weight Tube 45 102 63 42 24. Press two 60mm Square Inner Caps (64) into the 24 Weight Guide Top Frame (49). Attach the Weight Guide Top Frame (49) to the Weight Guide Upright (42) with two M10 x 75mm Bolts (92), four M10 Washers (35), and two M10 Nylon Locknuts (34). Do not tighten the Locknuts yet. Attach the Weight Guide Top Frame (49) to the Center Top Frame (46) with two M10 x 78mm Bolts (32) and two M10 Nylon Locknuts (34). Tighten the M10 Nylon Locknuts (34) used in 64 steps 12-24. 25. Attach the Butterfly Bracket (55) to the Center 25 Upright (45) with two M10 x 78mm Bolts (32), two M10 Washers (35), and two M10 Nylon Locknuts (34). 49 46 34 32 64 35 34 35 34 35 92 35 42 32 55 32 45 35 34 35 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
14
23. Press two 48mm Weight Carriage Caps (63) into
the Weight Carriage (62).
Insert an M10 x 19mm Bolt (102) into the bracket
on the Weight Carriage (62) from the side shown.
Slide the Weight Carriage (62) onto the Weight
Guide Upright (42) so that the weight tube is
toward the Center Upright (45).
25. Attach the Butterfly Bracket (55) to the Center
Upright (45) with two M10 x 78mm Bolts (32), two
M10 Washers (35), and two M10 Nylon Locknuts
(34).
24. Press two 60mm Square Inner Caps (64) into the
Weight Guide Top Frame (49).
Attach the Weight Guide Top Frame (49) to the
Weight Guide Upright (42) with two M10 x 75mm
Bolts (92), four M10 Washers (35), and two M10
Nylon Locknuts (34).
Do not tighten the
Locknuts yet.
Attach the Weight Guide Top Frame (49) to the
Center Top Frame (46) with two M10 x 78mm
Bolts (32) and two M10 Nylon Locknuts (34).
Tighten the M10 Nylon Locknuts (34) used in
steps 12–24.
23
24
63
63
42
45
64
64
49
46
34
34
92
35
35
35
35
34
42
32
102
62
Weight
Tube
25
45
35
35
34
55
32
32