Weider Club C670 Bench English Manual - Page 16
M10 x 45mm Bolt 33 and an M10 Nylon Locknut
View all Weider Club C670 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
29. Locate the Medium Cable (69). Route the Cable 29 up through the Weight Guide Top Frame (49) and over a Pulley (87). Attach the Pulley inside the Top Frame with an M10 x 75mm Bolt (92), two M10 Washers (35), two 17mm Spacers (89), and an M10 Nylon Locknut (34). 30. Route the Medium Cable (69) over a Pulley (87) 30 and down through the Weight Guide Top Frame (49). Attach the Pulley inside the Top Frame with an M10 x 75mm Bolt (92), two M10 Washers (35), two 17mm Spacers (89), and an M10 Nylon Locknut (34). 49 34 87 35 89 35 89 92 69 34 35 87 49 89 89 69 35 92 31. Wrap the Medium Cable (69) under a Pulley (87). 31 Attach the Pulley and a Cable Trap (88) to the indicated hole in the Pulley Plates (82) with an M10 x 45mm Bolt (33) and an M10 Nylon Locknut (34). Make sure the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 32. Route the Medium Cable (69) up through the 32 Weight Guide Top Frame (49), over a Pulley (87), and back down through the Top Frame. Attach the Pulley inside the Top Frame with an M10 x 75mm Bolt (92), two M10 Washers (35), two 17mm Spacers (89), and an M10 Nylon Locknut (34). 69 34 87 88 82 33 34 69 35 89 87 49 89 92 35 33. Attach the Medium Cable (69) to the M10 x 33 19mm Bolt (102) in the Weight Carriage (62) with an M10 Nylon Locknut (34). 69 34 102 62 16