Weider Pro 7000 Uk Manual - Page 13
Lever 7. Slide two Foam Pads 21 onto the Pad
View all Weider Pro 7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
24. Attach the Seat (19) to the Seat Frame (6) with 24 two M6 x 25mm Screws (60), an M6 x 77mm 19 Screw (68), and an M6 Washer (78). Hook the Seat Frame (6) onto the Upright (3) at the indicated location. 6 78 60 68 25. Attach the Bumper (49) to the Leg Lever (7) with 25 an M4 x 16mm Screw (70). Apply grease to an M10 x 71mm Bolt (67). Attach the Leg Lever (7) to the Seat Frame (6) with the Bolt and an M10 Nylon Locknut (73). Do not overtighten the Bolt; the Leg Lever must be able to pivot easily. Grease 6 67 73 7 70 49 26. Slide two Foam Pads (21) onto the Seat Frame (6). Slide a Pad Tube (20) through a hole in the Leg Lever (7). Slide two Foam Pads (21) onto the Pad Tube. 26 21 6 21 7 20 27. Slide an Arm Pad (84) onto the VKR Frame (82). 27 Attach the Arm Pad and Base to the Frame with two M6 x 63mm Screws (103) and two M6 Washers (78). Repeat this step on the other side of the VKR Frame (82). 3 21 21 103 84 78 103 82 13