Weider Pro 7000 Uk Manual - Page 6
Attach the Upright 3 to the Base 1 with
View all Weider Pro 7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. Press the 110mm Round Inner Cap (42) into the Upright (3). 2 42 Set the Upright (3) onto the Base (1). Have a second person hold the Upright until this step is completed. Attach the Upright (3) to the Base (1) with the three M8 x 45mm Bolts (57), three M8 Nylon Locknuts (74), and four M10 x 25mm Screws (58). 3 58 58 74 57 74 1 57 3. Attach the Base Plate (2) to the Base (1) with the 3 four M4 x 40mm Screws (46), and two M4 x 64mm Screws (81). 2 46 6 1 46 81 81 46
6
2.
Press the 110mm Round Inner Cap (42) into the
Upright (3).
Set the Upright (3) onto the Base (1). Have a sec-
ond person hold the Upright until this step is com-
pleted.
Attach the Upright (3) to the Base (1) with the
three M8 x 45mm Bolts (57), three M8 Nylon
Locknuts (74), and four M10 x 25mm Screws (58).
3.
Attach the Base Plate (2) to the Base (1) with the
four M4 x 40mm Screws (46), and two M4 x
64mm Screws (81).
2
3
42
58
58
57
57
74
74
1
3
1
81
81
46
2
46
46