Weider Viper 2000 Uk Manual - Page 5

3. Press the 1 1/4" Inner Cap (57) into the Front Upright (42). 3 Attach the 1" Plastic Stop (64) to the centre hole in the Stop Bracket (63) with a 5/16" x 1 1/2" Bolt (24) and 5/16" Nylon Locknut (3). Attach the Stop Bracket (63) to the Front Upright (42) with a 5/16" x 2" Bolt (61), 5/16" Flat Washer (8), and 5/16" Nylon Locknut (3). Slide the Front Upright (42) onto the two 5/16" x 2 1/2" Carriage Bolts (1) in the Base (4). Thread two 5/16" Nylon Locknuts (3) onto the Carriage Bolts. Do not tighten the Nylon Locknuts yet. 63 3 8 61 Single Hole 3 64 24 57 42 4 3 1 4. Press two 2" Inner Caps (27) into the Top Frame (67). 4 Attach the Top Frame (67) to the Front Upright (42) with two 5/16" x 2 3/4" Bolts (11), 5/16" Flat Washers (8), and 5/16" Nylon Locknuts (3). Do not tighten the Nylon Locknuts yet. Attach the Top Frame (67) to the Stop Bracket (63) with a 5/16" x 2 3/4" Bolt (11), 5/16" Flat Washer (8), and 5/16" Nylon Locknut (3). Do not tighten the Nylon Locknut yet. Attach the Top Frame (67) to the Rear Upright (82) with two 5/16" x 2 3/4" Bolts (11), 5/16" Flat Washers (8), and 5/16" Nylon Locknuts (3). 11 8 27 3 11 11 8 8 67 3 27 3 63 Tighten all Nylon Locknuts used in steps 2 through 4. 42 82 5