Weslo Pursuit E45 Bike English Manual - Page 5
and two M10 Nylon Locknuts 45.
View all Weslo Pursuit E45 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1. Attach the Front Stabilizer (2) to the front of the 1 Frame (1) with two M10 x 75mm Carriage Bolts (35) and two M10 Nylon Locknuts (45). 35 2 2. The Console (9) requires three "AA" batteries (not 2 included); alkaline batteries are recommended. Insert three batteries into the Console as shown. Make sure that the batteries are oriented as shown by the dia- gram inside the Console. 9 1 45 Batteries 3. Hold the Console (9) near the Upright (6). Insert the 3 console cable and the console wire into the indicated hole and down through the Upright. Attach the Ground Wire 9 ground wire to the Upright with an M4 x 16mm Screw (21). 21 21 Insert the excess wire and cable into the Upright (6). Attach the Console (9) to the Upright with four M4 x 16mm Screws (21). Make sure that the wires and the cable are not pinched. Hole 21 Console Wire 6 Console Cable 5