Western Digital My Net N900 Central User Manual - Page 18
Connecting to the Router Wirelessly, On/Off, WesternDigital - default password
View all Western Digital My Net N900 Central manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
GETTING STARTED 1 2 3 1. Connect the power cable to the router's DC connector and into an AC power outlet. Press the On/Off button on the back of the router once to turn it on. The four LEDs on the front panel of the router light up one by one as it boots up. 2. Connect the included yellow Internet (Ethernet) cable to the router's Internet port and the modem. Note: One Ethernet (network) cable is included in the product package. You can purchase additional cables from the WD Store or another source. 3. Using Ethernet cables, connect network devices or computers to the router's unused Ethernet ports. 4. Continue to "Configuring a New Router" on page 15. Connecting to the Router Wirelessly If you are using a desktop computer with a wireless card or a laptop computer with wireless capability, you can connect wirelessly to the router immediately. The same is true of mobile wireless devices with Wi-Fi enabled. 1. Make sure your computer's Wi-Fi is turned on. 2. From the list of wireless networks on the computer's or device's screen, select the WesternDigital network and connect. By default there is no password. Continue to "Configuring a New Router" on page 15. 14 MY NET N900 CENTRAL USER MANUAL