Western Digital My Net N900 Central User Manual - Page 34
Connecting a Device That is Not WPS Enabled, Click here to connect
View all Western Digital My Net N900 Central manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
BASIC SETTINGS AND TASKS Note: The label on the bottom of the router displays the default PIN. You can change the PIN on the Wi-Fi Protected Setup screen. (See "Advanced WAN (Internet) Category" on page 38.) Once you change the PIN, the default value is invalid unless you reset the router to default values. 3. Click Next. Connecting a Device That is Not WPS Enabled 1. On the Add a Wi-Fi Device screen (above), click the Click here to connect by entering network name and password link: 2. Using the values shown on the screen, enter the following into your wireless device's Wi-Fi connection screen as prompted: The Wi-Fi network SSID of the wireless network you want to use The password for the wireless network you selected Note: By default there is no password. If a password was configured during setup, that password displays in the Password field. 3. Click Close. 30 MY NET N900 CENTRAL USER MANUAL