Western Digital My Net N900 Central User Manual - Page 79
Port Forwarding Rules, Enter the following information for each port forwarding rule you create, Click
View all Western Digital My Net N900 Central manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
PERFORMING ADVANCED TASKS 3. Enter the following information for each port forwarding rule you create: Port Forwarding Rules Enabled Application Name External Port Range Protocol IP Address Computer Name Internal Port Range Select the check box to enable the port forwarding rule. Clear the check box to disable. From the drop-down list, select the application whose data you want to forward to the client on your local network. Click the double arrows to populate the Name, Internal Port, External Port and Protocol fields. Enter the port(s) you want to forward from the WAN interface (Internet). The port is automatically populated when you pick an application from the drop-down list. Select the protocol that you wish to port forward. The options are All, TCP, and UDP. The protocol will be automatically be selected if you pick an application from the drop-down list. Can be manually entered or populated by your selection from the Computer Name drop-down list. Device on your local network to which the rule will be applied. Click the double arrows to populate the IP Address field. Enter the port(s) on the LAN client to which you want to forward data. The port is automatically populated when you pick an application from the drop-down list. 4. Click Save at the top or bottom of the page. 75 MY NET N900 CENTRAL USER MANUAL