Xerox 1235/DX Service Guide - Page 37
Front Cover B Open Close Front Cover B, Fuser Missing Reseat Fuser, Power Off/On
UPC - 042215474542
View all Xerox 1235/DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Printer fault messages Code Front panel message Service message E14 Front Cover B Open Close Front Cover B E14-Front Cover B Open 1. Close the cover. 2. Inspect the switch and ensure the switch's actuator is not broken. 3. Test the front cover open switch using the sensor test described in "Switch scan test" on page 63. 4. Inspect the switch's wiring harness. 5. Replace the engine controller board. EA Black Drum Missing Reseat Drum, Power Off/On EA-Black Drum Missing EB Cyan Drum Missing Reseat Drum, Power Off/On EB-Cyan Drum Missing EC Magenta Drum Missing Reseat Drum, Power EC-Magenta Drum Missing Off/On ED Yellow Drum Missing Reseat Drum, Power Off/On ED-Yellow Drum Missing 1. Remove and install the drum unit. 2. Inspect the spring-loaded drum contact assembly. Ensure they are clean and move up and down freely. Remove the assembly and reseat it, if necessary. 3. Replace the engine controller board. 4. Replace the printer unit chassis EE Transfer Belt Missing Reseat Belt, Power Off/On EE-Transfer Belt Unit Missing 1. Remove and re-install the transfer belt unit. 2. Clean the transfer belt unit's contact on the front-left side of the engine chassis. Clean the corresponding contacts on the transfer belt unit. 3. Install a new transfer belt unit. 4. Replace the engine controller board. 5. Replace the printer unit chassis. EF Fuser Missing Reseat Fuser, Power Off/On EF-Fuser Unit Missing 1. Remove and reinstall the fuser. 2. install a new fuser. 3. Replace the low-voltage power supply. 4. Replace the engine controller board. 24 Phaser 1235 Network Color Printer