Xerox 1235/DX Service Guide - Page 75

These are the items of the engine maintenance mode menu. s Switch Scan Test s Motor & Clutch Tests s Test Print s Consumables count reset s Consumable Status s Printer Status This table details the menu items, their sub-menus, and settings. Engine maintenance mode menu Menu - scroll using Menu(1) or Menu(5) Items - scroll Settings - scroll using using Item(2) or Item(6) Value(3] or Value(7) Description SWITCH SCAN MOTOR & CLUTCH TEST TEST PRINT NV-RAM INITIAL (consumables count reset) CONSUMABLE STATUS PRINTER STATUS SCAN00 thru SCAN19 Lists each motor and clutch Items set for test print TABLE 1 TABLE 2 TABLE 3 Displays each consumable item Lists print count and impressions made by each imaging unit Test start/stop Test start/stop Alternation of setting or Test start/stop Select parameters of print such as paper source and print mode. Test start/stop Test start/stop no settings no settings Select and test printer switches and sensors Test the printer motors and clutches. A selected motor or clutch is operated for 10 seconds Test the print engine's ability to print The selected table determines which items will be initialized. The counter values are initialized after exchanging the drum belt unit, fuser unit or toner cartridge. The adjusted values for mechanical controls are all cleared to their initial values. The consumption status of each consumables is displayed in turn. Values show are of prints made and percentage of toner consumed. The life status of the selected consumable is displayed. 62 Phaser 1235 Network Color Printer