Xerox 1235/DX Service Guide - Page 86

Consumable count initialization This test menu item allows you to initialize the print engine's consumable counts and registration set points. 1. Enter the diagnosis mode by pressing and holding the Menu (1) and Enter (4) keys as you turn on the printer. 2. Press the Menu (1, 5) keys to scroll through the list of test until NV-RAM INITIAL appears on the upper display. 3. Press the Item (2, 6) keys to select either Table 1 or Table 2. The tables determine which NVRAM items will be initialized. Refer to the tables printed below. 4. Press and hold Value (3) for 10 seconds to initialize the items of the selected table. The front panel display NV-RAM INITIAL blinks eight times. 5. Press Enter (4) to exit the test mode. Table 1: Initialization items - consumables Initialization Item Detail Drum Counter Black Yellow Magenta Cyan Belt Unit Counter Fuser Unit Counter Toner Counter Black Yellow Magenta Cyan Initializes the drum counter's count after the replacement of a drum. Initializes the print count after the replacement of a transfer belt unit. Initializes the fuser's print count after the replacement of a fuser unit. Initializes the toner use count after a toner cartridge is replaced Service Guide 73