Xerox 1235/DX Service Guide - Page 74
_adjust.pdf, Diagnostics mode
UPC - 042215474542
View all Xerox 1235/DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Service Tests and Adjustments Diagnostics mode To start the engine maintenance mode: 1. Turn off the printer. 2. Press and hold the Menu (1) and Enter (4) keys. 3. Turn on the printer. 4. When, DIAGNOSTIC MODE xx.xx.xx is displayed on the control panel (xx.xx.xx is the ROM version), release the control panel keys. 5. Press the Menu (1) key to enter the maintenance mode menu. 6. Press the Item (2) or (6) keys to scroll through the menu. 7. Press the Enter (4) key to activate the displayed menu item. Press the Enter (4) key again to discontinue a test in progress. Use engine maintenance mode to test the printer sensors, test the media transport system, test the imaging LED banks, and to reset NVRAM. To exit engine maintenance mode, while DIAGNOSTIC MODE xx.xx is displayed, press Online (0). Alternately, you can turn the power off, wait a few seconds, and then turn power back on. Service Guide 61