Xerox 6180N FreeFlow® Print Server MICR User Guide - Page 12

Selecting MICR fonts Checking the font version Selecting the wrong font can result in improper signal strength and high reject rates at the bank. To make sure that you have the font that you want, print a question mark, ?, in the MICR line. While the resulting document does not have a valid MICR line, the printed font is obvious. You can also print a test pattern. Refer to "Printing MICR test forms," for the procedure. The test forms contain font version information: the font name, revision character (if applicable), and the datastream type (PS, PCL, LCDS). The following table shows the version information that is displayed on the test form for each font: Table 1-2. Test Form Font Information Font type E13B Type 1 E13B Type 3 E13B Datastream / Type Resolution PostScript Type 1 600 dpi PostScript Type 3 300 dpi PCL 600 dpi Version information E13B 609 PS E13B 4230 PS E13B 609 PCL E13B PCL E13B Landscape LCDS 300 dpi 300 dpi E13B REV.A PCL E13B4L REV A E13B Portrait LCDS 300 dpi E13B4P REV A 8 MICR User Guide