Xerox 6180N FreeFlow® Print Server MICR User Guide - Page 17

Setting the font resolution Before printing MICR jobs, you must set the resolution attribute appropriately for the queue to which you will be sending the jobs. The following table lists the different MICR font formats and the resolution at which each font should be printed. Table 1-3. MICR Font formats Font name and format LCDS PS PCL Required resolution E13B 300 DPI 300 DPI and 600 DPI 300 and 600 DPI LCDS PS PCL 300 DPI 600 DPI 600 DPI CMC7 If your document contains scalable fonts or simple line art generated at 600 dpi, the differences between printing at 300 or 600 dpi are subtle. However, if your document contains bitmaps with a resolution of 600 dpi, printing at 300 dpi causes a degradation of image quality. To preserve image quality, regenerate the bitmaps at 300 dpi. NOTE: PCL and PostScript fonts must be printed at the correct queue resolution and with the correct resource resolution, or errors will occur. In PCL, this causes a minro spacing error. In PostScript, subtle but significant character distortions occur. See Selecting Fonts for more information. For the Nuvera MX printers, a 300 DPI queue is not an available option. Printing using the 1200 DPI queue works fine as long as the 600 DPI fonts are used. MICR User Guide 13