Yamaha 407 Owner's Manual - Page 61

3 Press the [USB] button. 3 4 4 Press the [E] (USB AUDIO RECORDER) button to call up the recording display (USB AUDIO RECORDER display). 5 If necessary, press the [E] (PROPERTY) button to call up the Property display, then check the information of the USB flash memory. Quick Guide 5 6, 7 8 The following information is indicated on the PROPERTY display. • DRIVE NAME Number of the USB storage device (USB 1, USB 2, etc.) • ALL SIZE Size of USB storage device • FREE AREA Available recording space on the USB storage device • POSSIBLE TIME Available time for recording Press the [F] (OK)/[EXIT] button to close the PROPERTY display. n The USB storage device of "USB1" is selected as the recording destination when multiple USB storage devices are connected. If a floppy disk drive is assigned to "USB1," "USB1" will be skipped. To check the number of the USB storage device (USB1 and USB2, etc.), press the [A]/[B]/[F] button on the display of step 4, and change the tab. Press the [EXIT] button to return to the previous display. 6 Start recording by pressing the [J] (REC) button, then start your performance. When recording begins, the "RECORDING" indication on the display changes to red, and the elapsed recording time is displayed. CAUTION Avoid frequently connecting/disconnecting the USB flash memory, or turning the power on/off too often. Doing so may corrupt the USB flash memory data or the recording data. 7 Stop recording by pressing the [J] (STOP) button. The file name is automatically named (and is always given a new, unique name), and a message indicating the file name is displayed. n The recording operation continues, even if you close the Recording display by pushing the [EXIT] button. To stop the recording, press the [J] (STOP) button on the Recording display. CVP-409/407 Owner's Manual 61