Yamaha 970AM Owner's Manual - Page 42
Re-recording TRACK 1 partially
View all Yamaha 970AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Recording Your Performance Re-recording TRACK 1 partially This section explains how to record part of a song again. Procedure 1. Pause the song at the beginning of the part you wish to re-record. Use the B [-]/[+] buttons while the playback screen is displayed to move through the measures or play back the recording and press the [START/PAUSE] button to locate a point slightly prior to the beginning of the part you wish to re-record. Playback screen A B NO YES NOTE If the playback screen is not displayed, press one of the SONG SELECT [ ] [ ] buttons once. C D 2. Select a voice or voices for recording, if necessary. Repeat Step 2 on page 40 if you wish to change the previous settings. 3. Select the recording method and enter record mode. 3-1 Press and hold down the [REC] button, and press the C [-]/[+] buttons repeatedly to specify how the recording should start and press the D [-]/[+] buttons repeatedly to specify how the recording should end. While you are holding down the [REC] button, the following recording method select screen appears. A B NO YES C D Starting methods: Norm (Normal) - The existing data will be erased after re-recording starts. Key On - Data that exists prior to the point where you start playing a note will not be erased. 42 CLP-970A