Yamaha 970AM Owner's Manual - Page 80
Transmitting the initial settings
View all Yamaha 970AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
MIDI [MIDI SETTING] Selecting a type of data transmitted via MIDI [TransmitParameter] This parameter enables you to specify which MIDI data the Clavinova can transmit. See the procedure on page 66. A B NO YES C Select a type of data. D Select On or Off. Type of data: Note, Control, Program, Pitch Bend, SystemRealTime, SysEx (System Exclusive) Setting range: On/Off Normal setting: On for all types of data Executing song data bulk dump [SongBulkDump] You can save current song data on the Clavinova as MIDI bulk data by transferring it to a connected MIDI data filer (such as an MDF3) or a sequencer. To play back the saved song data, send the bulk data back from the storage device to the Clavinova and follow the usual playback procedure. You can interrupt song data bulk dump transmission by pressing the B [- (NO)] button. See the procedure on page 66. A B NO YES C D Transmitting the initial settings on the panel [InitialSetup] You can transmit the panel data, such as voice selection, to a connected sequencer. Before you record performance data to a connected MDF3 or sequencer, it is useful if you first send and record (at the beginning of the performance data) the panel setup data for your performance during playback. See the procedure on page 66. A B NO YES C D Executing voice data bulk dump [VoiceBulkDump] You can transmit the voice data specified in the "Voice Setting" menu (page 72) as MIDI bulk data. You can interrupt voice data bulk dump transmission by pressing the B [- (NO)] button. See the procedure on page 66. A B NO YES C D 80 CLP-970A