Yamaha 970AM Owner's Manual - Page 43

Recording Your Performance Ending methods: Replace - The data after the point you stop recording will also be erased. Punch Out - The data after the point you stop recording will remain. 3-2 Keep holding down the [REC] button and press the [TRACK 1] button. The [TRACK 1] indicator flashes in red. (To stop recording, press the [REC] button again or press the [STOP] button.) Follow the procedure beginning with Step 4 on page 40. TIP If you cancel recording by pressing the [REC] button, recording stops when you press the button. If you cancel recording by pressing the [STOP] button, the Clavinova locates the top of the song. Recording to [TRACK2] This section explains how to record another part on the second track. 2 1 CLP-970 DEMO SONG SELECT TRACK TRACK EXTRA FILE 1 2 TRACKS METRONOME START/ STOP SETTING A NEW SONG MIN MAX TRANSPOSE SONG BALANCE STOP START/ REC SONG DOWN UP PAUSE SETTING MASTER VOLUME SYNCHRO START SONG C TEMPO 2 Procedure B CONTRAST NO YES EXIT D MAIN PIANO E. PIANO/ HARPSI- MALLET ORGAN STRINGS/ BASS CHORD CHOIR SPLIT POINT LEFT PIANO/ HARPSI/ ORGAN/ BASS E. PIANO MALLET STRINGS VOICE SETTING VOICE REVERB CHORUS BRILLIANCE EFFECT MIDI SETTING OTHER SETTING 1. Select a voice. Select a voice (or voices) for recording. Repeat Step 2 on page 40. 2. Enter record mode and select a recording track. Press and hold down the [REC] button and press the [TRACK 2] button. The [TRACK 2] indicator flashes in red. (To cancel recording, press the [REC] or [STOP] button.) TIP Pressing the [TRACK 1] button repeatedly toggles between playback on (the indicator lights up in green) and off (the indicator turns off). Make the recording by following the procedure beginning with Step 4 on page 40. You can record a new part while listening to playback of the recorded [TRACK 1] data. CLP-970A 43