Yamaha CM-1 CobraNetCM-1 Upgrade Guide
Yamaha CM-1 Manual
 |
View all Yamaha CM-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha CM-1 manual content summary:
- Yamaha CM-1 | CobraNetCM-1 Upgrade Guide - Page 1
and Default Setting of CobraNet Discovery 4 1.4. IP Address Manual Setting (If not updated properly by Automatic Setting).... 7 the results of the use of this guide. z The illustrations and LCD screens as shown in this update guide are for instructional purposes only, and may appear somewhat - Yamaha CM-1 | CobraNetCM-1 Upgrade Guide - Page 2
-C or DME4io-C CobraNet Discovery This is application software developed by Cirrus Logic, Inc. for monitoring/maintaining the CobraNet network. In this update guide, it is used to update the CobraNet Interface firmware. If you do not have the software, download from the following URL. http://www - Yamaha CM-1 | CobraNetCM-1 Upgrade Guide - Page 3
) as shown below: Ethernet category 5 Ethernet category 5 MY16-C MY16-CII straight cable Switching straight cable Hub DME8i-C/DME8o-C/DME4io-C PC ACU16-C/NHB32-C CobraNet Interface Update Guide 3 - Yamaha CM-1 | CobraNetCM-1 Upgrade Guide - Page 4
1.3. Installation and Default Setting of CobraNet Discovery Follow the instructions below to install CobraNet Discovery and make the default settings. 1. Download the CobraNet Discovery | CobraNet Discovery] from the "Start" menu to launch CobraNet Discovery. CobraNet Interface Update Guide 4 - Yamaha CM-1 | CobraNetCM-1 Upgrade Guide - Page 5
automatically, and then check [Enable Auto Assignment]. You should enable automatic assignment of the IP Address. However, the IP address should be assigned manually if it cannot be updated properly by automatic setting. (See page 7) 6. Click [OK] to close the dialog box. 7. Turn on the device - Yamaha CM-1 | CobraNetCM-1 Upgrade Guide - Page 6
and the "sysDescription" column as shown below, the IP Address is not assigned properly. Follow the "1.4. IP Address Manual Setting" on page 7 and assign the IP Address manually. If the IP Address is set properly, preparation has been completed. Go to "2. Updating procedure" (page 9). CobraNet - Yamaha CM-1 | CobraNetCM-1 Upgrade Guide - Page 7
setting is not required if it has been automatically assigned. Follow the procedure below to set the IP Address manually. 1. Select [All Programs | Accessory | Command Prompt] from the "Start" menu to open the window for "New IP Address" from the pop-up menu. CobraNet Interface Update Guide 7 - Yamaha CM-1 | CobraNetCM-1 Upgrade Guide - Page 8
] to close the dialog box. If the following warning message appears, click [OK] to close the dialog box. Preparation is now complete. CobraNet Interface Update Guide 8 - Yamaha CM-1 | CobraNetCM-1 Upgrade Guide - Page 9
-click on the device you wish to update in the CobraNet Discovery window, and select "Update Firmware" from the pop-up menu. CobraNet Interface Update Guide 9 - Yamaha CM-1 | CobraNetCM-1 Upgrade Guide - Page 10
on the display. Never turn the power off during updating, since this may damage the firmware and cause the device to malfunction. CobraNet Interface Update Guide 10 - Yamaha CM-1 | CobraNetCM-1 Upgrade Guide - Page 11
5. Click [OK] to close the pop-up window below and turn off the device. 6. Turn on the device again. Updating is now complete. U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2006 Yamaha Corporation A0 CobraNet Interface Update Guide 11
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
 |
 |
CobraNet
TM
Interface
Update Guide
This update guide describes how to update the CobraNet Interface firmware for Yamaha
CobraNet devices (ACU16-C, NHB32-C, MY16-C, MY16-CII, DME8i-C, DME8o-C,
DME4io-C).
Contents
1.
Preparation
...................................................................................................................
2
1.1.
System Requirements
..........................................................................................
2
1.2.
Connection
............................................................................................................
3
1.3.
Installation and Default Setting of CobraNet Discovery
....................................
4
1.4.
IP Address Manual Setting (If not updated properly by Automatic Setting)
....
7
2.
Updating Procedure
....................................................................................................
9
2.1.
Checking Your Current Firmware Version
..........................................................
9
2.2.
Uploading the Latest Firmware Version
.............................................................
9
Special Notices
All copyrights of this update guide are proprietary to Yamaha Corporation.
Copying and reproduction of this update guide in whole or in part by any means is expressly forbidden
without the written consent of Yamaha Corporation.
Yamaha makes no representations or warranties with regard to the use of this update guide and
cannot be held responsible for the results of the use of this guide.
The illustrations and LCD screens as shown in this update guide are for instructional purposes only,
and may appear somewhat different from those on the final specifications.
For any changes on the firmware, some functions or specifications resulting from the version upgrades,
please check the following Yamaha website.
“CobraNet” and “CobraNet Discovery” are registered trademarks of Cirrus Logic, Inc.
All company names and product names are t trademarks or registered trademarks of their respective
companies.
Specification in this document is subject to change without notice due to continual improvements.
CobraNet Interface Update Guide
1