Yamaha CM-1 CobraNetCM-1 Upgrade Guide - Page 5
CobraNet Interface Update Guide
 |
View all Yamaha CM-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
4. Select "Options" from the "View" menu. The "Options" dialog box appears. Select the network adapter used to connect the device you wish to update from "Network Adapter" list. 5. Click the [Default] button in the "IP Address Range" field to assign the IP Address automatically, and then check [Enable Auto Assignment]. You should enable automatic assignment of the IP Address. However, the IP address should be assigned manually if it cannot be updated properly by automatic setting. (See page 7) 6. Click [OK] to close the dialog box. 7. Turn on the device while connecting to the device you wish to update. CobraNet Interface Update Guide 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
 |
 |
4.
Select “Options” from the “View” menu. The “Options” dialog box appears. Select the
network adapter used to connect the device you wish to update from “Network Adapter”
list.
5.
Click the [Default] button in the “IP Address Range” field to assign the IP Address
automatically, and then check [Enable Auto Assignment].
You should enable automatic assignment of the IP Address. However, the IP address
should be assigned manually if it cannot be updated properly by automatic setting. (See
page 7)
6.
Click [OK] to close the dialog box.
7.
Turn on the device while connecting to the device you wish to update.
CobraNet Interface Update Guide
5