Yamaha CS1D Owner's Manual - Page 194
If necessary, change the INSERT I/O POINT., INSERT/DIRECT POINT screen IN PATCH func
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Chapter 13. Graphic EQ The following signal routes can be selected as a patch destination. • IN 1-48 INSERT OUT Patch to the insert-out/insert-in of an input channel 1-48 or ST IN channel 1-4. • IN 49-96 INSERT OUT {this button is not valid for the 48 channel model} Patch to the insert-out/insert-in of an input channel 49-96 or ST IN channel 5-8. • MIX INSERT OUT Patch to the insert-out/insert-in of a MIX channel 1-48. • MATRIX INSERT OUT Patch to the insert-out/insert-in of a MATRIX channel 1-24. • STEREO A (L/R) Patch to the insert-out/insert-in of the STEREO A channel (L or R). • STEREO B (L/R) Patch to the insert-out/insert-in of the STEREO B channel (L or R). Hint If the short name of a channel is displayed on a red background, this indicates that some other item (an internal effect, input/output unit, or another GEQ) has already been inserted into that channel. Be aware that if you select such a channel as the patch destination for a GEQ module, the previously-inserted item will be defeated. 5. In the top row of the screen, click either the 1-48 INSERT OUT button or the 49-96 INSERT OUT button {this button is not valid for the 48 channel model}, and then click one of the buttons in the lower part of the screen to select the channel number. When you click a number, you will return to the previous GEQ PARAMETER screen. Notice that the module you selected is displayed at the right of the INSERT button. Hint If one side of a stereo channel (or of two paired channels) is patched to one of two adjacent odd-numbered → even-numbered GEQ modules, the remaining channel will automatically be assigned to the other GEQ module. If you turn on the LINK button of the GEQ PARAMETER screen, adjacent odd-numbered → even-numbered GEQ modules will be linked. 6. Turn on the GEQ ON/OFF button located in the upper middle of the screen. Hint The GEQ can also be switched on/off in the GEQ ASSIGN 1-12/13/24 screens. 7. In the LCD FUNCTION ACCESS block, press the INPUT [PATCH] switch several times to access the INSERT/DIRECT POINT screen (IN PATCH function). • INSERT/DIRECT POINT screen (IN PATCH function) If an input channel is selected as the GEQ insert, the INS. button of the corresponding channel in the INSERT/DIRECT OUT screen will automatically be turned on. • INSERT/DIRECT POINT 8. If necessary, change the INSERT I/O POINT. • The INS. button will switch on/off only when you select/cancel the insert destination in the GEQ PARAMETER screen. Selecting/canceling the GEQ insert destination in the IN PATCH/OUT PATCH screen will not operate this function. • In the INSERT/DIRECT POINT screen you can always switch the INS. button on/off. • If you insert a graphic EQ into an output channel, press the OUTPUT [PATCH] switch several times to access the INSERT POINT screen (OUT PATCH function), and make the setting in the same way. • If you defeat GEQ insertion in the GEQ PARAMETER screen, the INS. button of the corresponding channel will automatically be turned off. 135