Yamaha CS1D Owner's Manual - Page 408

EFFECT GEQ MON/CUE (monitor/cue) functions phantom power on/off, switch between normal/ inverted phase, and adjust the input gain. 4 2 2 DEFINE From the following choices, this selects the signal that will be monitored when "DEFINE" is selected in the MONITOR SOURCE section. • MIX 1-48............Output signal of MIX buses 1-48 • MATRIX 1-24 ....Output signal of MATRIX buses 1-24 • 2TR IN 3-6 .........Input signal from 2-TRACK IN DIGITAL jacks 3-6 of the CS1D • DIRECT IN.........The input signal from the connector selected in the DIRECT IN SELECT section (3) 5 4 Level meters This is a peak level meter that shows the pre-fader level of MONITOR OUT connector B (i.e., the level before the MONITOR B [LEVEL] volume). The level of the signal that is output from the MONITOR OUT connector will vary depending on the state of the MONITOR B [LEVEL] volume and the [ON] switch. 5 ON/OFF This button is an on/off switch for the signal that is output from the MONITOR OUT jacks B. This will not affect the output to the PHONES MONITOR B jack. SCENE MIDI/GPI/TC UTILITY SYS/W.CLOCK METER 3 3 DIRECT IN SELECT Select the two input connectors that will be monitored when "DIRECT IN" is selected as the signal for monitoring. When you click the button, a popup window will appear in which you can select the unit number/slot number/channel for the input jack. The input level of the signal is shown by the level meter at the left. If an input card with head amp is selected, this screen will allow you to switch between A/B jacks, turn 73 MON/CUE