Yamaha CS1D Owner's Manual - Page 388

EFFECT SYS/W.CLOCK (system/word clock) function WORD CLOCK [Function] Although the PM1D system is designed to continue audio processing as far as possible even if there are synchronization-related problems or incorrect settings, word clock synchronization (audio system clock) must be established for all devices in the system. In this screen you can specify the word clock that will operate the PM1D system. In general, the frequency of this clock is referred to as the sampling rate or sampling frequency. ■ Console In the LCD FUNCTION ACCESS block, press [SYS/W.CLOCK] (press repeatedly until the screen shown at the right appears) ■ Display MENU button → SYS/W.CLOCK button → WORD CLOCK tab GEQ SCENE MIDI/GPI/TC UTILITY SYS/W.CLOCK METER [Screen functions] 2 1 4 3 1 SETTING LEVEL Select one of the following two modes for making word clock settings. • BASIC This mode simplifies word clock settings for the PM1D system by limiting the items that can be set. You can automatically set all word clock settings of the PM1D to their optimal state simply by selecting the word clock (the reference word clock) that will be the master clock. Unless you need to make special settings, we recommend that you normally use this level. • ADVANCED This level allows more detailed settings to be made. If MASTER CLOCK SELECT is other than INT 48k/INT 44.1k/W.CLOCK IN, changing from ADVANCED to BASIC will forcibly select INT 48k. 2 MASTER CLOCK SELECT Select the clock source that will be the master clock. The entire PM1D system will be controlled so that it operates in synchronization with the selected clock source. This setting will determine the sampling rate of the PM1D system. When the BASIC button is on, the clock source can be selected from the following devices. 53 MON/CUE