Yamaha HTR 5740 MCXSP10 Manual - Page 30
Select a sound field program if desired., To listen with headphones SILENT CINEMA, To adjust the tone - surround sound system
UPC - 027108918907
View all Yamaha HTR 5740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
PLAYBACK 7 Select a sound field program if desired. Press PROGRAM l / h repeatedly (or press AMP on the remote control to select the AMP mode, then press one of the sound field program buttons repeatedly) to select a sound field program. (See page 39 for details about sound field programs.) l PROGRAM h AMP or Front panel STEREO 1 HALL 2 JAZZ 3 ROCK 4 MUSIC ENTERTAIN TV THTR 5 6 7 MOVIE 8 q/DTS 9 NIGHT 0 EX/ES 10 STRAIGHT ENTER EFFECT Remote control To listen with headphones (SILENT CINEMA) "SILENT CINEMA" allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS surround, through ordinary headphones. "SILENT CINEMA" activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs. When activated, the "SILENT CINEMA" indicator lights up in the front panel display. Notes • This unit will not be set to "SILENT CINEMA" when MULTI CH INPUT is selected as the input source. • "SILENT CINEMA" is not effective when the Direct Stereo or 2ch Stereo program is selected, or in STRAIGHT mode. To adjust the tone You can adjust the tonal quality of your front left and right CONTROL speakers or headphones (when connected). Press CONTROL on the front panel repeatedly to select TREBLE or BASS, then press BASS/TREBLE -/+ repeatedly to BASS/TREBLE increase or decrease. • Select TREBLE to adjust the high frequency response. • Select BASS to adjust the low frequency response. To cancel the tone control, press CONTROL repeatedly to select BYPASS. y Speaker and headphone adjustments are stored independently. Notes • If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers. • CONTROL is not effective with the Direct Stereo program (page 30) or MULTI CH INPUT. To mute the sound Press MUTE on the remote control. The MUTE indicator blinks in the front panel display. MUTE To resume the audio output, press MUTE again (or press VOLUME -/+). The MUTE indicator disappears from the display. y You can adjust the muting level (see page 48). 26