Yamaha IIs Owner's Manual - Page 53

Edit Section [Voice6] Output Routing This page lets you set an output routing for the voice assigned to the note number. Though your basic options are one of the INDIVIDUAL OUTPUT (1 to 6) jacks for parallel output or a pair of OUTPUT jacks for stereo output, you can use them for more variations in conjunction with effect settings (page 55). [Voice6] Output RevSend ChoSend 49C#2 stereo 127 127 1 2 3 4 1 Note Number & Name Determines a target note number (13~94: C#-1~A#5). Each note number is shown with a specific note name. 2 Output Determines the output for the voice assigned to the note number 1. When routed to an Individual Output, the voice cannot be monitored using headphones. ❏ Settings: • stereo: Routed to OUTPUT (L/MONO and R). • InsFx1, InsFx2: Routed to the specified insertion effect (1 or 2). You cannot select these when the Localizer is enabled. • thru: Routed to OUTPUT (L/MONO and R) bypassing the Localizer. You can select this only when the Localizer is enabled. • IND1&2, 3&4, 5&6: Routed to the specified pair of Individual Outputs (in stereo). • IND1, 2, ... 6: Routed to the specified Individual Output (in mono). n If you select either insertion effect (InsFX1 or InsFX2), the final output is determined by the insertion effect settings. 3 RevSend Determines the send level to the reverb effect (system effect) for the voice assigned to the note number 1. ❏ Settings: 0~127 [VoiceCopy] Voice Copy You can copy voice settings for a specific note number (MIDI channel 10) to the drum kit you are editing, letting you set up an editing template for creating drum kits with similar settings. [VoiceCopy] Note Kit Note from 49C#2 to current 49C#2 1 2 3 1 (from) Note Determines the source note name (of the current drum kit). ❏ Settings: 13C#-1~94A#5 2 (to) Kit Determines the destination drum kit. Select current when copying to the current drum kit. ❏ Settings: current, U1~U40 3 (to) Note Determines the destination note name of the drum kit 2. ❏ Settings: 13C#-1~94A#5 Copy Operation After selecting the source and destination, press the ENTER/ YES button. An "Are You Sure?" confirmation message appears in the display. Press the ENTER/YES button again to actually execute the copy operation. Press the EXIT/NO button to cancel. When you return to the copy page, continue copying if desired, or resume making voice settings. 4 ChoSend Determines the send level to the chorus effect (system effect) for the voice assigned to the note number 1. ❏ Settings: 0~127 n Actual amounts of the reverb and chorus effects for each drum voice are determined by the master send levels for the entire drum kit (page 58). 53