Yamaha IIs Owner's Manual - Page 77

Utility Features 3 TrgSet Determines the trigger settings for preset drum kits (page 21). Select one of the six different presets that is most suitable for your pad configuration. ❏ Settings: type1~type6 Trigger Set Trigger Input Jack Type1 Type2 Type3 Type4 Type5 Type6 SNARE 1 TP TP any 120SD 120SD RHP any RHP TP 65S any TP TOM1 2 TP 100 TP any any 65S RHP TP any TP any TP TOM2 3 TP 100 TP any any 65S RHP TP any TP any TP TOM3 4 TP 100 TP any any 65S RHP TP any TP any TP TOM4 5 TP 100 TP any any 65S RHP TP any TP any TP RIDE 6 PCY PCY PCY 150S 150S 150S any PCY any PCY any PCY CRASH1 7 any PCY any PCY any PCY any PCY any PCY any PCY HI-HAT 8 RHH RHH RHH 130 130 130 any TP any TP any TP KICK 9 any KP any KP KP 120 KP 120 any KP any KP (reserved) 10 any KP any KP KP 120 KP 120 any KP any KP CRASH2 11 any PCY any PCY any PCY any PCY any PCY any PCY (reserved) 12 any TP (reserved) 13 any PCY (reserved) 14 any TP (reserved) 15 any TP (reserved) 16 any TP n Refer to the Trigger Settings (page 37) for details of pad types in the above table. n This function will be disabled if you enable the trigger link function in the same page. 4 FCoffset Determines the precise pedal position at which the open hihat sound changes to a closed hi-hat sound, when using the hi-hat controller pedal. This function simulates the physical adjustment of the hi-hat opening (the space between the top and bottom cymbals). The smaller the value, the more narrow the "virtual" opening. ❏ Settings: -32~0~+32 5 FCspt Determines the length of time for a foot-splashed hi-hat sound played with the hi-hat controller (open hi-hat sound played only by the pedal). For larger values, you can play the foot-splashed sound more easily; however, slight movements of the pedal may trigger the sound inadvertently. ❏ Settings: 0~127 6 IncFunc, DecFunc A pad connected to the trigger input specified here can act as increment (IncFunc) or decrement (DecFunc) switch, regardless of its trigger function setting (page 37). You can enable its original trigger function by disabling the function here (off ). ❏ Settings: off, IN1~IN16 n If you specify the same trigger input for both IncFunc and DecFunc, the connected pad will work only as an increment switch. [UT 8] Factory Set This page allows for restoring the factory-set data into the DTXTREME IIs memory. [UT 8] SYSTEM Factory Set When you restore the factory settings, all current settings will be overwritten and lost. It is recommended that you back up important data to the memory card or other external storage media beforehand. Restoring Factory Set When the display above is shown, press the ENTER/YES button. An "Are You Sure?" confirmation message appears in the display. Press the ENTER/YES button again to actually execute the factory set operation. The DTXTREME IIs will automatically reboot and restore itself to the status it was in when you turned it on for the first time. Press the EXIT/NO button to cancel the operation. 77