Yamaha MCR730B User Manual - Page 19

Chapter 2: Getting Started HDMI connection If your TV has an HDMI input, you can connect it to the DRX-730 with an HDMI cable and enjoy the best possible picture quality. ■ HDMI audio output Normally, the speakers connected to the DRX-730 are used to output the sound. However, you may want to listen through your HDMI TV's speakers, in which case you can turn HDMI audio output on and off as follows. Using an HDMI cable (sold separately), connect the DRX-730's HDMI jack to an HDMI input on 1 Set the DRX-730 to standby. your TV. HDMI-compatible TV 2 While holding down Stop ( ) on the 2 DRX-730, press STANDBY/ON, keeping IN Stop ( ) pressed until "DVD - NO REQ." HDMI appears on the display. HDMI cable (sold separately) 3 Press Play/Pause ( / ) repeatedly to select "HDMI AUDIO ON." MAINS HDMI CLASS 2 WIRING CABLAGE CLASSE 2 R 6 MIN SPEAKER SPEAKERS R SUBWOOFER OUT OUT IN AUX AM ANT GND FM ANT 75 UNBAL. PR PB DOCK Y OUT VIDEO COMPONENT VIDEO OUT OPTICAL DIGITAL Note: • You must set the DRX-730's HDMI resolution and HDMI color settings to match the capabilities of your HDMI TV (see page 53). If you select the wrong resolution, you may loose the picture altogether. ■ Supported HDMI output resolutions North America models Other models 1080p/60 Hz 1080p/60 Hz (NTSC) 1080p/50 Hz (PAL) 1080i/60 Hz 1080i/60 Hz (NTSC) 1080i/50 Hz (PAL) 720p/60 Hz 720p/60 Hz (NTSC) 720p/50 Hz (PAL) 480p/60 Hz 480p/60 Hz (NTSC) 576p/50 Hz (PAL) 480i/60 Hz 480i/60 Hz (NTSC) 576i/50 Hz (PAL) If you change your mind at this point, select "DVD - NO REQ." instead. 4 Press STANDBY/ON. HDMI Audio output is turned on and the DRX-730 goes on standby. Press STANDBY/ON again to turn it back on. To turn HDMI Audio output off, repeat the above procedure but select "HDMI AUDIO OFF" in step 3. Note: • The audio output by the HDMI jack is always 2-channel PCM. ■ About HDMI HDMI stands for High-Definition Multimedia Interface. An extension of the DVI (Digital Video Interface) standard used to connect computer displays, HDMI was designed as the next generation digital interface standard for TVs and AV equipment, allowing uncompressed digital video and digital audio in various formats to be delivered on a single cable. With HDMI, separate cables for video and audio connections are no longer necessary. And because it's digital, it delivers unimpaired high quality video and audio. In addition, HDMI supports the HDCP (High Bandwidth Digital Content Protection) system that's used to protect copyrighted video and audio content from illegal copying. * If your HDMI-compatible TV does not support the above resolutions, the picture may not display correctly. * The DRX-730 is designed to be connected to an HDMI component. If it's connected to a DVI component, normal operation may not be possible depending on the DVI component. English 13 En