Yamaha MCR730B User Manual - Page 61

■ Subtitle Display Determines whether DVD-Video disc subtitles are displayed by default. • On (default): Subtitles are displayed by default if available. • Off: Subtitles are not displayed by default. Note: • Some DVD-Video discs may forcibly display subtitles regardless of this setting. Display settings ■ OSD Language Sets the language of the on-screen menus. • English (default): English on-screen menus. • Language: Available languages depends on where you purchased the DRX-730. ■ Angle Indicator Determines whether the camera icon ( ) is displayed on-screen when playing content on a DVD-Video disc that features multiple camera angles. • On (default): Camera icon is displayed. • Off: Camera icon is not displayed. Option settings ■ Parental Lock See "Parental Lock" below. ■ DTS Downmix Determines how mutichannel DTS audio is downmixed when the DTS Out setting (see page 52) is set to DTS > PCM. Select Lt/Rt if your AV receiver/decoder supports Dolby Pro Logic but not DTS and it's connected to the OPTICAL DIGITAL OUT. • STEREO (default): Mutichannel DTS is downmixed in to a 2-channel stereo mix. • Lt/Rt: Mutichannel DTS is downmixed in to a matrix-encoded surround mix that is compatible with Dolby surround matrix decoders. ■ DivX(R) VOD See "DivX® VOD" on page 56. Chapter 10: Initial Settings Parental Lock DVD-Video discs containing content that may not be suitable for everyone may use the parental lock system to restrict viewing. (See the disc's case for details.) You can set the DRX-730 so that discs with a high parental lock level cannot be played without first entering a password. There are eight parental lock levels. In addition, some DVD-Video discs use country or region codes to block unsuitable content based on the country or region that you set on the DRX-730. To use parental lock, you must first enter a password, set the parental lock level, and specify your country or region. By default, no password is set. • Password: Used to set the password. • Level Change: Used to set the parental lock level. • Country Code: Used to specify your country or region. ■ Setting the password You must set a password before the Level Change and Country Code settings can be set. 1 Select "Password," and then press ENTER. 2 Use the number buttons to enter a 4-digit password. The numbers appear on-screen as asterisks (*). 3 Press ENTER to set the password. The password is set. Notes: • We recommend that you make a note of the password. If you forget it, you'll need to reset the DRX-730 (see page 61) and set a new password. • When the password and parental lock level have been set, when you attempt to play a disc that exceeds the set parental lock level, you'll be prompted to enter the password and playback will not be possible unless you enter the correct password. • Instead of preventing disc playback completely, some DVD-Video discs may just skip unsuitable scenes. • Not all DVD-Video discs support parental lock and those that don't can be played regardless of these parental lock settings. 10 English 55 En