Yamaha MCR730B User Manual - Page 55
Recording
UPC - 027108105840
View all Yamaha MCR730B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 8: Recording You can connect a recording component, such as a CDR, MDR, or casette recorder, to the DRX-730 for recording and playback. 1 Connect your recording component to the DRX-730. See "Connecting a recorder (CDR, MDR, etc.)" on page 14 for details. 2 Turn on the DRX-730 and recording component. 3 On the DRX-730, select the input source that you want to record. If you selected the DVD input source, load the disc you want to record. 4 Start recording on the recording component. 5 Start playback on the DRX-730. To playback the recording, select the AUX input source (see page 16). If your recording component has an optical digital input, you can connect it to the DRX-730's OPTICAL DIGITAL OUT jack and record digitally. Notes: • Refer to your recording component's owner's manual for details on using it. • Adjustments to the DRX-730's volume, bass, treble, and balance do not affect recording. • To prevent a signal loop, the AUX input source is not output by the AUX OUT jacks, so you cannot record a source connected to the AUX IN. • The OPTICAL DIGITAL OUT does not output signals from the radio, DOCK, AUX IN, or PORTABLE jacks. To record from these sources, connect the DRX-730's AUX OUT jacks to the analog audio input on your recording component. • Depending on the source material, the DRX-730's OPTICAL DIGITAL OUT may output MPEG, Dolby Digital, or DTS format digital audio that the recording component cannot record. In this case, set the digital audio output settings so that PCM is output (see page 52). • Discs and files that use copy protection cannot be recorded. 8 49 En English