Yamaha MCR730B User Manual - Page 43

Chapter 5: Using the Tuner Manual tuning In Manual Tuning mode, you can tune in to radio stations manually. ■ Changing the frequency step (Asia and Taiwan models only) Depending on the frequency spacing used by radio stations in your area, you may need to change the Tuning Step setting. AUTO/MANUAL BAND TUNER TOP MENU INFO. AE SETUP PRESET ENTER MENU AE RETURN AUTO/ MANUAL MEMORY VOLUME BAND TUNER DVD/USB AUX/PORTABLE DOCK SOUND PURE DIRECT MUTE TIMER SLEEP DIMMER DISPLAY 1 Press TUNER to select the TUNER input source. 2 Press BAND repeatedly to select FM or AM. FM 100.7 MHz STANDBY/ON Play/Pause ( ɹɹ ) Stop ( ) TIMER HDMI PROGRESSIVE STANDBY/ON USB PORTABLE PHONES INPUT VOLUME 1 Set the DRX-730 to standby. 2 While holding down Stop ( ) on the DRX-730, press STANDBY/ON, keeping Stop ( ) pressed until "DVD - NO REQ." appears on the display. 5 3 Press AUTO/MANUAL repeatedly to select Manual Tuning mode (AUTO indicator off ). In Manual Tuning mode, the AUTO indicator on the display is off. 4 To increase the tuning frequency, press Up ( ). To decrease the tuning frequency, press Down ( ). The frequency will change continuously if you keep your finger on the button. Note: • Only mono reception is possible in Manual Tuning mode. 3 Press Stop ( ). "TU - AM9/FM50" (the default setting) appears on the display. 4 Press Play/Pause ( / ) repeatedly to select the tuning step used in your area: "TU - AM10/FM100" or "TU - AM9/FM50." • TU - AM10/FM100: AM 10 kHz/FM 100 kHz • TU - AM9/FM50: AM 9 kHz/FM 50 kHz 5 Press STANDBY/ON. The frequency step is set and the DRX-730 goes on standby. Press STANDBY/ON again to turn it back on. English 37 En